An aluminum and glass storefront entrance door on a retail street

Storefront doors · Duluth, GA

Storefront Doors in Duluth, single doors and pairs.

Storefront door installation and replacement for Duluth restaurants, bakeries, salons and shops along Pleasant Hill Road, Satellite Boulevard and around the Town Green — single doors and pairs, in aluminum and glass. Free written estimate.

Tempered glass, measured to the stile Pivots and closers replaced, not just tightened Free written estimate, same-day when we can
FreeWritten estimates
21Services, one crew
13Metro Atlanta towns served
Same-dayService when the schedule allows

Duluth businesses

Duluth's busiest entrances are pairs, and pairs wear differently.

Pleasant Hill Road through Duluth is one plaza after another, with Korean restaurants, bakeries, grocery stores, salons and cafés that fill up in the evenings and on weekends. Many of those entrances are pairs of aluminum doors, and a pair wears in its own way: the two doors stop meeting evenly, the active leaf drags while the inactive one sags, and the lock at the meeting stiles no longer lines up. Rehanging can buy time; when the stiles themselves have racked, replacing both doors together is the repair that lasts.

When a Duluth pair along Pleasant Hill Road is replaced, the new doors can either meet in the middle or close against a removable center mullion. We show you both on the walkthrough and price the one your entrance needs.

Around the Town Green and along Main Street, older storefronts sit beside newer mixed-use buildings, and the doors are more often single entrances. There a replacement door has to suit the building it goes into, old or new, down to the finish of the pull.

Along Satellite Boulevard the centers are larger, and the restaurants there often seat enough people that the code may ask for panic hardware on the exit doors. Replacing a pair is the time to check: an exit device on each leaf, with vertical rods where the doors meet in the middle or a removable mullion so each leaf carries its own, has to be planned before the doors are ordered, because the stile has to be made to take it.

A technician checking the bottom pivot of an aluminum storefront door
The glass storefront of a retail space in metro Atlanta

What we do

Everything on a storefront entrance.

A storefront door drags, then chips the floor, then stops latching, then the glass cracks at the corner. Each step is cheaper to fix than the next one.

New storefront doors

Narrow, medium and wide stile aluminum doors, single or in pairs, with the frame and sidelites, glazed with tempered glass and fitted with the closer, lock and pull you choose.

Commercial glass doors in offices and lobbies

Aluminum-framed and all-glass doors at office suites, medical offices and condo or apartment lobbies, repaired and replaced like a storefront.

Glass replacement

Cracked or broken door glass secured and replaced with tempered glass cut to size. Insulated units where the entrance is heated and cooled.

Pivots and hinges

A door that drags or sits crooked usually has a worn bottom pivot or a loose top pivot. Replaced, and the door re-hung level.

Closers

Surface, concealed overhead and floor closers replaced or rebuilt so the door closes fully and quietly instead of slamming or hanging open.

Locks and hardware

Hookbolt and deadlatch locks, cylinders, thumbturns, push-pull bars and panic hardware fitted to aluminum stiles the right way.

Weatherstrip and sweeps

The brush and pile weatherstrip that stops the draft, the dust and the water at the threshold — the part that is missing on most doors we see.

How we do storefront doors, step by step

Why Duluth businesses choose us

Why our storefront doors stop needing calls.

The same door coming back every six months is a door that was adjusted instead of repaired. On every storefront door we work on:

  • Free written estimate after we look at the door
  • The failed part named, not just the door tightened
  • Tempered safety glass, measured to the stile
  • Pivots replaced and the door re-hung level
  • Closer sized to the door and adjusted to latch
  • Locks and cylinders fitted to aluminum stiles properly
  • Opening secured while glass is on order
  • Same-day service when the schedule allows
A storefront lock cylinder and deadlatch being fitted to an aluminum stile

The quote

What storefront door work costs.

A pivot is a small number and a new pair of doors with sidelites is a large one. What decides the estimate is which part failed and whether the frame is still worth keeping.

Always included

  • Site visit and a free written estimate
  • Failed pivots, closers, locks or glass identified in writing
  • Tempered glass cut to size and glazed
  • Pivots, hinges and closers replaced and adjusted
  • Locks, cylinders and pulls fitted and keyed
  • New doors hung, glazed and adjusted to latch
  • Weatherstrip, sweep and threshold
  • Old door, glass and packaging hauled away

What changes the number

  • Repair against replacement: whether the door and frame are worth keeping
  • Single door or a pair, and the stile width
  • Clear, tinted or insulated glass
  • Surface closer, concealed overhead or floor closer
  • Standard lock or panic hardware on an exit door
  • Whether the frame or sidelites are replaced with the door

Good to know

Storefront doors questions from Duluth.

Your question is not here? Call (470) 691-8439 and put it to the crew directly.

Our double doors no longer meet. Can they be fixed?

Often, yes, by replacing the pivots and closers and rehanging both doors. If the doors have racked out of square or the stiles are cracked, a new pair is the lasting fix, and we tell you which one you have after looking at them.

Should our new pair have a center mullion?

A removable mullion lets each door lock on its own, which is simpler and more secure day to day; it comes out when you need the full width. Without it the doors meet in the middle, which suits an entrance that takes wide deliveries.

Can just one door of our pair be replaced?

Sometimes, when the frame and the other door are sound and the stile and finish can be matched. Usually both are replaced together, because a new door beside a worn one rarely meets it evenly for long.

Our doors slam shut. Can the closers be adjusted?

Usually, yes. A closer has separate settings for the speed of the swing and the last few inches before the latch, and adjusting them often fixes the slam on the same visit. A closer that leaks oil or no longer holds its setting needs replacing, and we say so on the estimate.

Worth reading first

Before you decide.

Where we work

Storefront doors across Duluth and metro Atlanta.

Based at 3850 Holcomb Bridge Rd, Peachtree Corners, GA 30092, serving the communities below.

AtlantaPeachtree CornersSandy SpringsMariettaDuluthNorcrossAlpharettaRoswellBuckheadDecaturSmyrnaKennesawLawrenceville

Your building is outside these towns? Call anyway: most of metro Atlanta is a short drive from the Peachtree Corners office.

Free estimate

Replacing a storefront door in Duluth?

Send the form and we call you back the same business day with a time for a walkthrough or a same-day visit. Every number you get from us is in writing.

(470) 691-8439Call or text
3850 Holcomb Bridge RdPeachtree Corners, GA 30092
Free estimate Call now